If you haven’t looked at our new BRX PLC from AutomationDirect, |
DataMax Extreme Ethernet cable from Quabbin® has a specially designed jacket developed to survive the many industrial hazards that commercial jackets will not. The DataMax cable jacket is pressure extruded over the cable core, "locking" the conductor pairs in place. This type of jacket construction provides very stable electrical performance, even when impacted, bent, or repeatedly flexed. These Cat5e flexing cables are available in 24 AWG, 2 or 4 twisted pairs with color coded high density polyethylene insulation, and with unshielded or overall braid and foil shields. The FR-TPE jacket has excellent chemical, moisture, and flame resistance, and exceptional low temperature flexibility; the cables are Type CMX Outdoor - CM and AWM Style 2463 UL classified. Starting at $15.00, continuous flexing cables are made in the USA and are sold in 20 to 1000 foot lengths. |
The data packets that are sent in Ethernet-based communication can be categorized into unicast, broadcast, and multicast. There are numerous redundancy protocols available that can help network operators build a reliable network for unicast and broadcast communication. A good indicator of the reliability of a network is how fast it can recover from an error when transmitting data. For many years, RSTP (Rapid Spanning Tree Protocol) has been widely used across the networking industry to prevent loops on Ethernet networks. When an error occurs on the network, RSTP may require around 10 seconds to rectify the cause of disruption. In comparison, Moxa’s network recovery technologies, Turbo Ring and Turbo Chain, can redirect to the backup path in less than 50 ms. For mission-critical applications, Moxa’s technologies are extremely beneficial because they help avoid downtime and allow data to be continually passed along the network even when there is an interruption. Posing a more difficult challenge to network operators is how to ensure reliable communication on multicast networks. Learn More
IronHorse shaft mount gearboxes (speed reducers) feature shafts and gears manufactured from the highest grade steel, case hardened and precision ground to AGMA standards for long lasting durability. The gearbox shafts have reinforced double lip seals to protect against contamination and prevent oil from escaping; premium ball and tapered roller bearings provide smooth operation and lower noise. Extended gear centers ensure tooth contact and provide consistent operation. Housings are 100% cast iron to provide industrial grade protection for the life of the unit. Gearboxes are available in 9:1, 15:1 and 25:1 gear ratios and in frame sizes from 2 to 5. Uses include reducing output speed, increasing torque, changing drive direction, and/or running two loads from one motor. Shaft mount gearboxes start at $616.00 (with torque arm included) and have a 1-year warranty. |
Traditional limit switches are limited in terms of accuracy and repeatability. These cost-effective, ultra-precise mechanical limit switches from Metrol® have repeatability down to 10, 5, 3, and even 0.5 microns (µm) depending on the specific model. Along with their high precision, these stainless steel limit switches are also some of the smallest switches/sensors available. Their tiny size allows them to be mounted in extremely tight locations. Five precision limit switch series are available: precision touch with 3 micron or 5 micron accuracy; high precision touch and tool setter with 0.5 micron accuracy; ball plunger with 10 micron accuracy, and high temperature rated with 10 micron accuracy and operating temperatures up to 200°C. The switches are IEC IP40 to IP67 rated depending on model. Precision limit switches start at $39.50 and have a 1-year warranty.
|
Almost everyone involved in the maintenance of electrical enclosures has, at one time or another, faced problems with overheated electrical enclosures. In most instances, the obvious solution was to install or upgrade the cabinet cooling fan only to find that it didn’t work too well. Here are some reasons why the obvious solution may not have worked. Read More
Two new feature-enhanced DL405 PLC CPUs have been added, the D4-454 and D4-454DC-1. The D4-454 CPUs ($859.00) provide all the capabilities of the D4-430, D4-440 and D4-450 CPUs, using updated microprocessor technology allowing the D4-454 to be the CPU of choice for the DL405 family. Both D4-454 CPUs include a built-in power supply and four communication ports. Each CPU offers a large amount of program memory, advanced diagnostics and a substantial instruction set that includes drum sequencers, ASCII output, floating point math, trig functions, bit of word manipulation, timed and hardware-triggered subroutines, For/Next loops, fill-in-the-blank PID control, and more. The DirectLOGIC DL405 controller offers reliable, time-tested hardware with a wide variety of I/O modules, configurations and many specialty modules available. |
The EA3-S3ML C-more 3" Micro touch panel ($198.00) has a 3.1-inch STN LCD monochrome display and twelve selectable LED-driven backlight colors. It features a 128 x 64 pixel display, and five function keys with red LED indicators. The EA3-T4CL C-more 4" Widescreen Micro touch panel ($269.00 ) has a 4.3-inch TFT LCD 480 x 272 pixel display (WQVGA) with 32K colors for customizing objects, screen backgrounds and displaying bitmap graphics. Both the 3-inch and 4-inch touch panels each have two serial ports, one micro-USB port and one built-in RJ45 Ethernet port. These 12-24 VDC powered panels can also receive power from the serial communications port of most AutomationDirect PLCs or through the USB port when connected to a PC for programming (using free EA-MG-PGMSW software). The panels are NEMA 4/4X and IP65 (indoor) rated. |
Technical Documents
- C-more Micro Panels Overview
- C-more Micro Panels Selection Guide
- C-more Micro Graphic Programming Software
- C-more Micro Graphic Programming Cable
- C-more Micro 3" Communication Cables Technical Specs
- C-more Micro 3" Panels Connections & Protocols
- C-more Micro EA1-T4CL Panel Technical Specs
- C-more Micro EA1-T6CL Panel Technical Specs
- C-more Micro 6"" EA1-S6MLW STN Monochrome Tech Specs
- C-more Micro EA3-S3ML Panel Technical Specs
- C-more Micro EA3-T4CL Panel Technical Specs
- C-more Micro EA3-T6CL Panel Technical Specs
- C-more Micro EA3-T8CL Panel Technical Specs
- C-more Micro EA3-T10CL Panel Technical Specs
Two new feature-enhanced DL405 PLC CPUs have been added, the D4-454 and D4-454DC-1. The D4-454 CPUs ($859.00 ) provide all the capabilities of the D4-430, D4-440 and D4-450 CPUs, using updated microprocessor technology allowing the D4-454 to be the CPU of choice for the DL405 family. Both D4-454 CPUs include a built-in power supply and four communication ports. Each CPU offers a large amount of program memory, advanced diagnostics and a substantial instruction set that includes drum sequencers, ASCII output, floating point math, trig functions, bit of word manipulation, timed and hardware-triggered subroutines, For/Next loops, fill-in-the-blank PID control, and more. The DirectLOGIC DL405 controller offers reliable, time-tested hardware with a wide variety of I/O modules, configurations and many specialty modules available. |
In today's industrial facilities and warehouses, hundreds of forklifts work side-by-side with people. How can we improve forklift operations while ensuring safe movement of people and machines in the facility? Read on to find out how a forklift manufacturer has taken advantage of wireless connectivity to help its customers efficiently manage hundreds of forklifts in their warehouses, thereby simplifying the arduous task of managing industrial traffic and ensuring operational safety. |
Data mining is transforming the face of factory automation, with the most striking change being the evolution of machine-to-machine (M2M) communication into system-to-system communication. Establishing connections between subsystems in network architectures adds new communications paths and network platforms, bringing new complexities and challenges. This month, we explore the solutions that address these challenges, especially with regard to protocol interoperability. |
Adding a seventh axis to your six-axis robotic system can be beneficial in a number of ways. Your work envelope is expanded, allowing the use of smaller, less-expensive robots. Parts can also be transferred to multiple workstations at greater distances, and more machines and processes are able to be serviced with one robot, which reduces costs.
When adding a seventh axis to your system, it’s important to consider not just the needs of the robot, but also the requirements of the supporting actuator. In particular, you’ll have to pay attention to the actuator’s duty cycle, expected life and maintenance requirements. Also, plan in advance your cable track mounting size and location to ensure that all necessary cabling will fit and the cable track movement will not interfere with the robot’s movements. |
ProSense® TSDA25 series temperature switches offer simple temperature monitoring and control with easy setup via mechanical adjustment dials. An extremely durable housing and no moving parts make these switches very reliable and ensure long-term stability without setpoint drift. TSDA25 series temperature switches are a direct replacement for the TSD25 series and offer higher accuracy and a standard sized 6mm diameter probe. Two temperature sensing ranges are available: -4 to 284°F (-20 to 140°C) and -13 to 284°F (-25 to 140°C). Two PNP normally open or two complementary PNP normally open/normally closed switching DC outputs are available. LEDs indicate switching and operating status. ProSense TSDA25 Series temperature switches are priced at $89.00 and have a 3-year warranty. |
Area Sensors from Micro Detectors (MD) are multi-beam, through-beam sensors with emitter and receiver elements used to sense wide areas. These area sensors are not personnel safety protective devices. CX0 Series basic area sensors have a sensing distance of up to 6m and a detection height up to 320mm. CX2 Series advanced area sensors also have a sensing distance of up to 6m with detection height of up to 960mm and offer analog outputs and a blanking function. Available Teach-in functions are used for product setting and adjustment. LEDs indicate the sensor alignment, optics condition and faults. The blanking function (CX2 series) allows the height of the active optic window to be adapted to the specific application by eliminating ("blanking") pairs of beams. MD area sensors start at $200.00, have a 3-year warranty and are IEC IP67 rated. |
Managed PoE Switch
Reliability Providing a stable IEEE 802.3af/at compliant electrical power supply. Flexibility An Ethernet cable provides the electrical power to devices such as VoIP phone, IP CAM, Wireless AP, LED display. Cost Reduction Reduces the need to build a power sourcing infrastructure. Efficiency By supporting the SNMP protocol, customers can receive the PoE status from end devices, even turning off the PoE function for each port. | |
Unmanaged PoE Switch | PoE Media Converter |
Rollon has one of the largest linear actuator ranges in the industry. Separate from our well know components, linear actuators provide a solution with guidance and drive mechanism assembled in one complete unit. Positional accuracies range down into the micron level and speeds to 9m/s; this combined with various cross sections and load capacity means we can always find a solution to your actuator problems. Rollon has one of the largest linear actuator ranges in the industry. Separate from our well know components, linear actuators provide a solution with guidance and drive mechanism assembled in one complete unit. Positional accuracies range down into the micron level and speeds to 9m/s; this combined with various cross sections and load capacity means we can always find a solution to your actuator problems. The majority of the actuators sold are manufactured in New Jersey, which ensures a quick and reliable delivery time. In addition we have regional applications engineers who are ready to go over your application and suggest the most cost effective solution for your needs. |
Optimized automation with integrated PROFINET, EtherNet/IP and Modbus/TCP entry-level managed switches
- Compatible with SIMATIC step 7 and TIA portal (PROFINET compatible models)
- PROFINET models support Media Redundancy Protocol (MRP)
- Faceplate compatible with Rockwell Factory Talk View (Ethemet/IP compatible models)
- Easy and tast deployment from Advantech IXM technology
- Crucial management functions ernbedded
Having switches which can communicate directly across a diverse range of machine automation devices is essential. Advantech’s latest EKI-5500/5600-EI series of Industrial Protocol managed switches have been designed to communicate through EtherNet/IP and are ODVA certified to meet the requirements of the Common Industrial Protocol (CIP) for added reassurance.
The EKI-5500/5600-EI series are new generation of Industrial Protocol managed switch products. They are OVDA certified with the faceplate of its software interface integrated with Rockwell FactoryTalk® View. The devices come with a compact metal housing that is IP30 rated to protect against dust filled industrial environments. The wide power input power (8.4 to 52.8 VDC) is dedicated to operating in areas of unstable power and rugged environments.
These 8~16 port Industrial Protocol managed switches are designed specifically for vertical markets and include the most essential functions to seamlessly communicate directly with Rockwell PLCs. Through the integration of Faceplate—a configuration front-end, the EKI-55500/ 5600-EI series can communicate directly with Rockwell FactoryTalk® View SE and ME versions. We also provide Electric DataSheets ( EDS files) to users to seamlessly integrate with Rockwell PLCs.
As you’d expect from an Advantech switch, the EKI-5500/5600-EI series include all the functions needed for successful and easy network configuration. Features such as Ring, VLAN, and SNMP make them especially convenient for setting up a network infrastructure, and with the inclusion of ODVA certification, engineers will find it easier to roll out and configure large numbers of switches that can link with a wide variety of devices in today’s industrial environments.
The EKI-5500/5600-EI series are new generation of Industrial Protocol managed switch products. They are OVDA certified with the faceplate of its software interface integrated with Rockwell FactoryTalk® View. The devices come with a compact metal housing that is IP30 rated to protect against dust filled industrial environments. The wide power input power (8.4 to 52.8 VDC) is dedicated to operating in areas of unstable power and rugged environments.
These 8~16 port Industrial Protocol managed switches are designed specifically for vertical markets and include the most essential functions to seamlessly communicate directly with Rockwell PLCs. Through the integration of Faceplate—a configuration front-end, the EKI-55500/ 5600-EI series can communicate directly with Rockwell FactoryTalk® View SE and ME versions. We also provide Electric DataSheets ( EDS files) to users to seamlessly integrate with Rockwell PLCs.
As you’d expect from an Advantech switch, the EKI-5500/5600-EI series include all the functions needed for successful and easy network configuration. Features such as Ring, VLAN, and SNMP make them especially convenient for setting up a network infrastructure, and with the inclusion of ODVA certification, engineers will find it easier to roll out and configure large numbers of switches that can link with a wide variety of devices in today’s industrial environments.
![](http://www.weebly.com/weebly/images/file_icons/pdf.png)
Advantech Managed Switches | |
File Size: | 193 kb |
File Type: |
![](http://www.weebly.com/weebly/images/file_icons/pdf.png)
Download Datasheet | |
File Size: | 401 kb |
File Type: |
AutomationDirect | INTEGRA Premium Series Wall Mount, Screw Cover Polycarbonate Enclosures
5/17/2017
The new Premium Series of INTEGRA wall mount enclosures adds lift-off screw cover, hinged screw cover and single door hinged cover with non-metallic latch versions. Starting at $46.00, the Premium series features INTEGRA's unique T-Rail mounting system for dead-front panels, swing-out panels, layering subpanels, and/or infinitely variable subpanel height. INTEGRA polycarbonate enclosures weigh less and are engineered for durability and impact resistance, UV stability, chemical resistance, design flexibility and machinability. The enclosures are NEMA Type 1, 2, 3, 3R, 3S, 4, 4X, 5, 6/6P, 12, and 13 rated and are watertight, non-corrosive, non-conductive, and easy to install and modify. Subpanels starting at $9.00 and other accessories including pole mount kits are available. INTEGRA enclosures are UL approved, CE, RoHs, and REACH compliant. |
- Integra Polycarbonate Enclosures Tech Specs, Screw Cover
- Integra Polycarbonate Enclosures Tech Specs, Hinged Screw Cover
- Integra Polycarbonate Enclosures Tech Specs, Single Door
- Integra Polycarbonate Enclosures Panels & Accessories Tech Specs
- Integra Polycarbonate Enclosures Technical Specs
Polycarbonate Enclosures Integra Polycarbonate Enclosures Installation Instructions
With more and more “things” on the edge being connected to the Internet, cellular communication has become an invaluable resource for connecting those things to the cloud. Cellular, however, is likely to cause unstable connectivity, costly data transmission, and unreliable control. To overcome these problems, the ioLogik 2500 series features dual SIM failover, 3-step cellular reconnection, dynamic IP access, active tags, local data logging, and Click&Go Plus. Take advantage of Moxa’s smart cellular connectivity, smart data acquisition, and smart control logic to make your industrial IoT system smarter than ever. |
AutomationDirect | National Sanitation Foundation (NSF) Approved Potable Water Solenoid Valves
5/3/2017
NS-Series NSF certified water valves (from GC Valves) are an excellent choice for food and beverage grade potable water applications where products can be consumed by humans. Three types of 2-port, 2-position, normally closed valves are available. The NS201 and NS211 series are piloted diaphragm valves with 316L stainless steel or Noryl (thermoplastic) bodies and are ported for 3/8, 1/2 or 3/4 inch NPT. Cost-effective NS301 series valves are direct acting and a good choice for potable water applications up to 400 psi. These valves have 303 stainless steel bodies and 1/4 inch NPT ports. 24VDC, 24VDC, 120VAC and 240VAC replacement coils are available, as are valve repair kits and complete valve rebuild kits. Made in the USA, NS Series potable water valves start at $73.00 and are NSF, CE, CSA, UL recognized and NEMA 4/4X protected. |
Advantech's AMAX-4800 series comprises of industrial EtherCat slave modules equipped with the EtherCAT protocol. The compact size and integrated DIN rail mount kit ensures easy installation in cabinets. Pluggable terminal blocks and LED indicators facilitate system setup and maintenance. All modules are protected by an isolation circuit for demanding industrial applications.
![](http://www.weebly.com/weebly/images/file_icons/pdf.png)
Datasheet | |
File Size: | 460 kb |
File Type: |
Make Your OT, IT, IIoT Protocol Interoperability Easier for Industry 4.0
![Picture](/uploads/7/3/8/8/7388264/published/white-paper-btn.png?1493136984)
A central consideration and challenge in achieving a connected smart factory is protocol division. Depending on the specific operation, system integrators may encounter numerous disparate automation protocols that must be connected to achieve the operational goals or optimization goals. The OT world encompasses MES (manufacturing execution systems), SCADA (supervisory control and data acquisition), PLCs, meters, valves, sensors and motors, etc. The most common protocols are PROFINET, PROFIBUS, EtherNet/IP, and Modbus. IT systems include an ERP (Enterprise Resource Planning) system that mostly uses SNMP, HTTP, SOAP, XML protocols. The IIoT and industry 4.0 application requires the connection of many devices and systems to collect and share the vast amount of high-quality data across OT and IT platforms. The mainstream protocols for the adoption of the IIoT or Industry 4.0 are MQTT, AMQP, and CoAP. Moxa is one of the few product manufacturers and solution providers that offer a comprehensive product portfolio that makes the interoperability of OT, IT, and IIoT protocols straightforward.